Micro-Growing: What Is It And How Does It Work?

 

Micro-Growing: What Is It And How Does It Work?

 

What is your rationale for not growing marijuana instead of buying dried buds from a dispensary near you? Does the lack of space play a role in it? It may be that you don’t want to invest in a grow room even though you have contemplated cultivating cannabis in the past? In any case, the solution is as simple as micro-growing.

 

Micro-Growing Marijuana

Growing weeds in a micro grow is fundamentally the same as growing cannabis in any other manner. It is the only exception that you need only a cupboard or a small cabinet space instead of a large growing area. This is because you are only growing one or two plants.

 

In addition to being the least expensive way to start growing marijuana, it also offers the best yield. The decision to set up a dedicated grow room comes only after you’ve tried it already and decided to grow more plants.

 

Methods Of Micro-Growing

It is possible to train yourself with micro-growing cannabis. It’s important to keep in mind, however, that autoflowering strains may benefit from a reduced amount of stress.

It is perfectly acceptable to use any of these methods if the seed is regular, feminized, or fast version.

 

The Screen of Green (SCROG)

There are many training methods based on SCROG. On top of the upper canopy, a wire screen is placed horizontally. By bending the branches, the bud sites are forced upward, with only one hole occupying each. Having an equal distribution of light makes it possible for the buds to develop maximum amounts of cannabinoids. As a result, yields are also increasing. Visit https://homegrowncannabisco.com/grow-your-own-with-kyle-kushman/advanced-techniques/screen-of-green/ to learn more

 

Topping

The act of topping is the removal of the top of the plant, causing multiple branches to grow. As a result, the plants now form bushy structures instead of growing upwards. Increase the number of bud sites and the yields will rise.

 

Low-stress training (LST)

Among the training techniques for beginners, LST is the safest and least destructive. In this case, the goal is to tie the higher branches, growing more side branches and colas as a result. A larger harvest size can be expected as a result.

 

Super cropping

The practice of super cropping involves pinching and breaking the branches of the main stem under high-stress conditions. It is hoped that by intentionally injuring the plant, it will be fooled into thinking that the stem is gone, and grow more lateral branches as a result.

 

Varieties of Seeds and Strains For Micro-Growing

It’s important to consider the available space when choosing a cultivar. During the flowering phase of Sativa plants, for example, their height can increase by 200-300%. Many strains are tall and slender, reaching 3 meters in length. Breeders have, however, developed mostly Sativa hybrids with little Indica characteristics in the past two decades. Take a look around and browse products at Homegrown Cannabis Co.

 

Micro-growing Indica hybrids are very popular. In addition, it extends no more than 100% during the blooming season. As well as having shorter flowering times, these plants also produce a smaller yield.

 

The use of automotive makes life more convenient as well. Small plants have a natural ability to transition to a flowering state without the help of light cycles. Many of these strains are also compact compared to typical hybrids of Indica origins. The best part is that they grow fast, allowing you to harvest the buds several weeks earlier than you would with traditional methods.

 

Water And Nutrients

Small containers are used in micro-growing. Having said that, it’s not a big deal. A small container also means that fewer nutrients and water can be held in the substrate. A secondary benefit is that the root system is not that extensive – fewer roots are able to absorb the nourishment. Therefore, larger containers require more fertilizer and water than smaller ones.

 

Sizing A Container

In the container, the plant’s size is affected by the container’s dimensions. A plant’s root system occupies roughly the same volume beneath the surface as the plant above ground. Because of the pot size, a plant’s size depends on how large its roots can grow.

 

A plant with a height of 12 inches requires 2 gallons of water. It should only be considered a general guideline. It is important to consider the height and available space in the growing area when choosing a strain. Some strains require more, while others require less. The reason for this is to ensure there will be no problems with vertical space once the plants reach maturity and begin to expand during blooming. It is recommended to use a final container with a capacity of 2-3 gallons in this case. Light sources should not be too close to the upper canopy of the growing area.

 

A Light Source Is Important

The use of an HID lamp in a small space can be problematic. As it is, there isn’t much room to promote better air circulation and ventilation, and the heat is too much.

 

In general, you should use 400 watts per square meter. Fluorescent tubes and CFLs are better than HPI/HPS lamps. Providing adequate light intensity and generating little heat, these lights are suitable for micro-growing. For blue-based lighting, you need to remember that red is used for flowering, whereas the blue color is used for vegetative growth.

 

Compromising by using fluorescent tubes or CFLs is not an option. There is not enough space to use HID lamps, so you are limited by that. As a result, the best thing for you to do is to provide the closest color possible. When you grow plants under HPS bulbs, they will grow and yield buds less efficiently than when under a fluorescent lamp.

 

In addition, you might want to consider a LED lamp that emits a full spectrum of light. However, you are free to decide if you want to pay more or not. With LEDs, you can produce higher-quality buds by using the right wavelengths.

 

Ventilation And Air Circulation In Micro-growing

Leaves are actively engaged in the process of photosynthesis while absorbing light energy from the sun. This process also requires carbon dioxide. It may not be possible to provide enough air in such a small space. As a result, CO2 is in decreasing supply. In that case, ensuring continuous air movement becomes much more important.

 

It is also essential to draw air into a growing space at the same time that excess heat is expelled. A small fan may be able to be placed in the room depending on its clearance. A computer fan can be helpful if the room is too crowded.

 

You can place a fan near the top to act as an exhaust fan, drawing warm air away. It might be possible to install another fan down below, which would be used as an intake fan for cooler, fresh air.

Please leave your questions below to start a question and answer thread about your subject. I monitor the comments and will respond ASAP!

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Note to readers: If you purchase something through one of our affiliate links, we may earn a commission